Need help?Do you have a question about the Marshall Amplification ORIGIN 20 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Wattage | 20W |
| Effects Loop | Yes |
| Preamp Tubes | 3 x ECC83 |
| Power Tubes | 2 x EL34 |
| Inputs | 1 x 1/4" |
| EQ | 3-band EQ |
| Reverb | No |
| Speaker | 1x10" |
| Controls | Gain, Bass, Middle, Treble |
| Outputs | 1 x 1/4" |
| Footswitch | Optional |
Details mains voltage compatibility, fuse type, and warnings against bypassing the fuse.
Step-by-step guide for connecting speakers, setting power, and initial operation.
Describes the function of the amplifier's main power switch.
Adjusts the amplifier's output power level for different performance scenarios.
Controls the overall output volume, allowing for overdrive at higher settings.
Adjusts the amplifier's voice from normal to high treble at the input stage.
To Next Page