Press button of time and temperature settings . Then you see flashing time adjustment indication and flashing hour meaning on the display . You could set up hours with buttons
(up) and (down). Hour range is from 0 to 24 hours. Interval is 1 hour. If you keep button or pressed, then hours go faster.
For minutes set up press button
shortly again and you see flashing time adjustment indication and flashing minute meaning on the display . You could set up minutes with buttons
(up) and (down). Minute range is from 0 to 59 minutes. Interval is 1 minute. If you keep button or pressed, then minutes go faster.
Press
for cooking program start.
Change default settings in cooking program running mode (with pressure)
If you want to change cooking time and temperature settings while cooking process is running (pressure cooking) press button . Then you see flashing time adjustment indication and
flashing hour meaning on the display
. You could set up hours t with buttons (up) and (down). Hour range is from 0 to 24 hours. Interval is 1 hour. If you keep button or
pressed, then hours go faster.
For minutes set up press button
shortly and you see flashing time adjustment indication and flashing minute meaning on the display . You could set up minutes with buttons
(up) and
(down). Minute range is from 0 to 59 minutes. Interval is 1 minute. If you keep button or pressed, then minutes go faster.
When all required settings are set up press for changes saving and the multicooker goes on cooking.
Save user settings
“CHEF ЇRІ” function saves last used settings of cooking time and temperature (for programs without pressure) and time (for cooking with pressure) after you press button . IП вШЮ НШЧ’Э ЩrОЬЬ ЛЮЭЭШЧ
, new settings are not saved. When you swich the multicooker on next time and choose program with manually changed settings you see your own settings on the display (time and temperature for
multicooker mode programs / time for pressure cooker programs).
For system recovery choose required program (where you need to get back to default settings) with
.Then press and buttons simultaneously. User presets will be released and the
program settings will be back to the basic.
FUNCTIONS
PRODUCT SELECTION FUNCTION
“ЇrЧМЭЛЬ ЫНФНЛЬСЧЦ” function is available in some pressure cooking programs: «/SЬНЯ», «/BrЧЬР», «//Steam/Boil». Cooking time is different for each product type. Three product
types are available for above mentioned programs: “MНЙЬ”, “FСЫР”, “VНПНЬЙКФНЫ”. For product selection:
Choose program with button. Function is available in «/SЬНЯ», «/BrЧЬР», «//SЬНЙХ/BЧСФ» programs.
To Next Page
Loading...
