When all required settings are set up press for changes saving and the multicooker goes on cooking.
PRESSURE COOKING
You could change time settings in pressure cooking programs: «/Soup», « /Milk porridge», «/Stew», «/Broth», «/Pilaw», «/Galantine»,
«/ /Cereals/Express», «//Steam/Boil» before cooking program start and in cooking program running mode. You could set up your own time settings in «/Chef» program.
Change default settings before cooking program start (with pressure)
Choose cooking program with button . If you need «/CРНО» program choose it with button .
The display shows preset time (for «/Chef» it is 2 minutes).
Press button of time and temperature settings
. Then you see flashing hour meaning on the display . You could set up hours with buttons (up) and (down). Hour range is
from 0 to 24 hours. Interval is 1 hour. If you keep button
or pressed, then hours go faster.
For minutes set up press button
shortly again and you see flashing minute meaning on the display . You could set up minutes with buttons (up) and (down). Minute
range is from 0 to 59 minutes. Interval is 1 minute. If you keep button
or pressed, then minutes go faster.
Press
for cooking program start.
Change default settings in cooking program running mode (with pressure)
If you want to change cooking time and temperature settings while cooking process is running (pressure cooking) press button . Then you see flashing hour meaning on the display .
You could set up hours with buttons
(up) and (down). Hour range is from 0 to 24 hours. Interval is 1 hour. If you keep button or pressed, then hours go faster.
For minutes set up press button
shortly and you see flashing minute meaning on the display . You could set up minutes with buttons (up) and (down). Minute range is
from 0 to 59 minutes. Interval is 1 minute. If you keep button
or pressed, then minutes go faster.
When all required settings are set up press
for changes saving and the multicooker goes on cooking.
Save user settings
To Next Page
Loading...
