Marta MT-4311 - Page 35

35
“CHEF ЇRІ” function saves last used settings of cooking time and temperature (for programs without pressure) and time (for cooking with pressure) after you press button . IП вШЮ НШЧ’Э ЩrОЬЬ ЛЮЭЭШЧ
, new settings are not saved. When you switch the multicooker on next time and choose program with manually changed settings you see your own settings on the display (time and temperature for
multicooker mode programs / time for pressure cooker programs).
For system recovery choose required program (where you need to get back to default settings).Then press
and buttons simultaneously. User presets will be released and the program
settings will be back to the basic.
FUNCTIONS
START DELAY FUNCTION
Use “SЬЙrЬ МНФЙб” function to delay time of cooking process start. “Start delay” function time range is from 30 minutes to 24 hours with an interval 5 minutes.
 Choose program with
button or with required program button.
 If required then change default settings with
button according to User manual article įCHEF PRO – temperature and time adjustment, manual set up”.
 Press long button
for “Start delay” function set up. The indication of button is on. Set up time meaning for “Start delay” with buttons and . Interval is 5 minutes. If you
keep button
or pressed then time scrolls faster.
 Press button
.
 You see start delay time countdown on the display. The indication of button
is on all the time while “SЬЙrЬ МНФЙб” function is going on. The indication of following cooking program is off while
“SЬЙrЬ МНФЙб” function is going.
 When time of start delay is over cooking process starts. The indication of button
is off. You see cooking program indication on the control panel.
NOTE:
 “SЬЙrЬ Мelay” function is not available in following cooking programs: “Frб/”, “CЙУН/”.
 DШЧ’Э lОКЯО ЩrШНЮМЭЬ in the multicooker pot for more than 12 hours – some products could spoil. Please mind product characteristics when you plan delay time.
 Cooking time is not included into“SЬЙrЬ МНФЙб” function time.
 Please mind that after “SЬЙrЬ МНФЙб” function, cooking time countdown starts only when the multicooker reaches working pressure or temperature.
KEEP WARM FUNCTION
“KННШ ЯЙrХ” function is used for cooked meal temperature maintaining. Maximum time of “KННШ ЯЙrХ” function is 24 hours. “KННШ WЙrХ” function follows automatically each cooking program (except
«/Frб» and «//БЧПРЭrЬ/DЧЭПР»).