Marti Electronics SRPT-40A - Ordering Information and Options

8/7/2003
6
ORDERING INFORMATION
Conditions (unless specified otherwise): 1.5 VSWR, 110 VAC input with B+ = 13 Volts, 25ºC ambient
MARTI
PART #
Frequency
Range
(MHz)
Maximum
RF Output
Power (W)
Typical MAX RF
Output Power over
Frequency
Certifications
SRPT30-150 135-185 30 20W 135-140 MHz
30W 140-180 MHz
20W 180-185 MHz
FCC ID: DDE-RPU-60W-150S
(FCC Part 74 Subpart D)
Emission Designators:
25K0F3E, 30K0F3E
SRPT30-230 215-250 30 30W 215-250 MHz
SRPT30-250 235-265 30 25W 235-245 MHz
30W 245-265 MHz
SRPT30-330 300-350 30 20W 300-315 MHz
30W 315-350 MHz
SRPT30-450
-or-
SRPT30-450T
(for TSL RPU)
430-480 30 30W 430-480 MHz FCC ID: DDE-RPU-50W-450S
(FCC Part 74 Subpart D)
Emission Designators:
10K0F3E, 25K0F3E, 50K0F3E
SRPT30-950 935-965 20 20W 935-960 MHz
18W 960-965 MHz
SRPT40A-150 135-185 60 50W 135-140 MHz
60W 140-175 MHz
50W 175-180 MHz
40W 180-185 MHz
FCC ID: DDE-RPU-60W-150S
(FCC Part 74 Subpart D)
Emission Designators:
25K0F3E, 30K0F3E
SRPT40A-230 215-250 30 30W 215-250 MHz
SRPT40A-250 235-265 30 25W 235-245 MHz
30W 245-265 MHz
SRPT40A-330 300-350 30 20W 300-315 MHz
30W 315-350 MHz
SRPT40A-450
-or-
SRPT40A-450T
(for TSL RPU)
430-480 50 50W 430-465 MHz
45W 465-480 MHz
FCC ID: DDE-RPU-50W-450S
(FCC Part 74 Subpart D)
Emission Designators:
10K0F3E, 25K0F3E, 50K0F3E
SRPT40A-950 935-965 20 20W 935-960 MHz
18W 960-965 MHz
Available OPTIONS for the SRPT-30/40A Transmitters
Marti No. Description
585-141 12-15 VDC External Supply Cable
585-142 15-30 VDC External Supply Cable
585-139 12-15 VDC Mobile Repeat Cable, CR/AR-10 to SRPT-30/40A
585-140 15-30 VDC Mobile Repeat Cable, CR/AR-10 to SRPT-30/40A
585-143 Fixed Repeat Cable, CR/AR-10 to SRPT-30/40A
700-250-13 Rack mounting kit
700-252-2 Mobile mounting kit
565-006-1 Racom 1402 Automatic Morse Code Station Identifier with mounting kit
585-088 SRPT30/40A TSL to Racom Cable Assembly