EasyManuals Logo

Martin Audio BlacklineX Powered XP12 User Manual

Martin Audio BlacklineX Powered XP12
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Copyright © 2019 Martin Audio Ltd. 17
BLACKLINEX POWERED USER GUIDE V1.0
BLACKLINEX POWERED USER GUIDE
Presets
1. FULL RANGE – This mode is optimised for stand-alone configuration without the use of sub reinforcement
2. WITH SUB – This mode introduces a high-pass filter to the loudspeaker to match properly with the XP118 subwoofer.
3. MONITOR – This mode features a low frequency roll-off and optimised equalisation to ensure maximum gain before feedback when
the loudspeaker is used as a floor monitor.
4. As you had done previously, rotate the speaker control encoder until the loudspeaker mode you desire is illuminated, then push to
select it. In this example we have selected 'WITH SUB':

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Martin Audio BlacklineX Powered XP12 and is the answer not in the manual?

Martin Audio BlacklineX Powered XP12 Specifications

General IconGeneral
TypePowered Loudspeaker
Crossover Frequency1.8kHz
FinishBlack textured paint
LF Driver12" (300mm)
HF Driver1" (25mm)
Frequency Response50Hz - 20kHz
Amplifier Power1000W
Coverage Pattern90° x 60°
Output ConnectorsXLR
EnclosurePlywood
MountingPole mount
Input ConnectorsXLR / TRS combo