Need help?Do you have a question about the Martin RUSH MH 7 Hybrid and is the answer not in the manual?
General| Type | Hybrid Moving Head |
|---|---|
| Zoom | Yes |
| Pan | 540° |
| Tilt | 270° |
| Control Protocols | DMX, RDM |
| Gobos | 7 |
| Prism | 3-Facet Prism |
| Effects | Frost |
| Connectors | PowerCon, 3-pin & 5-pin XLR |
Safety precautions and guidelines for preventing electric shock.
Safety measures to prevent burns and fire hazards during operation.
Guidelines for safely installing and operating the fixture to prevent physical injury.
Precautions and procedures for safe lamp handling and replacement.
Warnings and advice to prevent eye injury from light emission.
Initial setup steps and checks before operating the product for the first time.
Tips and procedures to extend the operational lifespan of the fixture's lamp.
Instructions for securely fastening the fixture to a flat, stable surface.
Guidelines for clamping the fixture to a truss or rigging structure.
Procedures for attaching a safety cable as a secondary support.
How to connect multiple fixtures in a power daisy-chain for mains supply.
Description of the fixture's LCD display, buttons, and connectors.
Overview of mains power input/output and DMX connectors.
Information on the location of the fixture's main fuse.
Recommendations for ensuring reliable DMX data transmission.
Step-by-step guide for connecting DMX data cables between fixtures.
How to navigate and use the fixture's onboard control menus.
Procedure for assigning a DMX start address to the fixture.
Configuration options for the fixture's lamp.
Settings for manual and automatic lamp control via panel or DMX.
Configure fixture behavior when DMX signal is lost (hold or blackout).
Options to reverse pan/tilt control and enable/disable position feedback.
Settings for standby mode and automatic blackout during movement.
Configuration options for the display backlight and error code visibility.
Procedures for clearing errors and restoring factory default settings.
Displaying fixture operating hours and lamp usage time.
Reading the internal temperature of the fixture's head.
Calibrating effects to their home positions using a position offset.
Description of the fixture's different operational modes and their characteristics.
Control over intensity and shutter effects like strobing and pulsing.
Details on static and rotating gobo wheels and available patterns.
Information on the color filters available and their selection.
Features related to prisms, frost filter, focus adjustment, and beam zoom.
Control over the fixture's head pan and tilt movements.
Guidelines for cleaning the fixture to maintain performance and prevent damage.
Step-by-step instructions for replacing the fixture's gobos.
Procedures and safety precautions for replacing the fixture's lamp.
Instructions for replacing the main fuse if the fixture is dead.
Information on authorized service and repair procedures.
DMX channel assignments for dimmer, shutter, and color effects.
DMX channel mapping for rotating and fixed gobos.
DMX control for prism and frost effects.
DMX channel assignments for zoom, focus, pan, and tilt controls.
DMX channels for lamp control, resets, and personality settings.
Configuration options related to DMX control and fixture information.
Adjusting lamp, DMX loss, pan/tilt, and blackout behavior.
Configuring display, error handling, factory resets, and effect calibration.
Solutions for problems with fixture light output or fan operation.
Troubleshooting steps for unresponsive or intermittent DMX control channels.
Diagnosing and resolving issues with the fixture not responding to DMX control.
Fixture dimensions, weight, and approved lamp specifications.
Details on dimming, shutter, colors, gobos, prisms, zoom, focus, pan, tilt.
Beam cutoff angles for Beam, Spot, and Wash modes.
Gobo specifications, housing, and input/output connection types.
Power requirements, current draw, and thermal operating limits.
To Next Page
