15
・
After the operation, remove any fluid, drain the chemical solution
remaining in the tank, then perform cleaning. Future problems with
pump start can be prevented by normal regular cleaning.
For disposal of water after washing this machine,
special care must be take so that chemical disasters
will not occur same as the conditioner.
For the chemical handling method, read the instruction
manual of the chemical carefully.
Idling must be less than one minute for machine
protection.
・
Remove the nozzle from the hose, lift the water intake
strainer from water, and run this machine at a low
speed with the valve opened to drain water (Grip: “0”,
Handle: “Start”).
To Next Page
Loading...
