To Next PageTo Next Page
Need help?Do you have a question about the Marvair AVP 36 and is the answer not in the manual?
General| Brand | Marvair |
|---|---|
| Model | AVP 36 |
| Category | Air Conditioner |
| Language | English |
Essential safety warnings, hazard levels (DANGER, WARNING, CAUTION), and personal protective equipment advice.
Overview of the MODPac II™ A/C series, cabinet sizes, capacities, and features.
Explanation of the refrigerant cycle (cooling) and heating modes, and ventilation options.
Reference to typical electrical schematics and component legends for system understanding.
Procedures for inspecting the unit upon arrival for any transit damage or missing components.
Site selection criteria, clearances, codes, and electrical supply considerations for proper installation.
List of standard kit components, optional accessories, and additional hardware required for installation.
Guidelines for wall openings, duct clearance, airflow requirements, and ducting material specifications.
Instructions on locating and adjusting the fresh air hood for variable outside air intake.
Details on the installation and function of the optional "V" damper for fresh air control.
Steps for attaching the bottom support bracket to the wall using appropriate hardware.
Procedures for securing the unit to the wall bracket, aligning ductwork, and sealing openings.
Guidance on high voltage and low voltage wiring, including crankcase heater and thermostat connections.
Step-by-step procedure to verify proper operation of the cooling cycle after installation.
Procedure to confirm the correct functioning of the heating cycle for applicable units.
General approach to troubleshooting, emphasizing understanding the unit and visual inspection.
A table correlating common problems with likely causes and recommended corrective actions.
Electrical tests and procedures to diagnose potential issues with the compressor motor.
Explanation of thermal cut-out switches and contactors within the electric heating system.
Tables detailing CFM at various static pressures, ship weights, and filter sizes for different models.
Diagrams and measurements illustrating the physical dimensions of various MODPac II™ A/C configurations.
Recommended maintenance schedule, including servicing of air filters, coils, cabinet, and drains.
Details of the limited product warranty, coverage periods, exclusions, and owner responsibilities.
