To Next PageTo Next Page
Need help?Do you have a question about the Marvair AVP 42 and is the answer not in the manual?
General| Brand | Marvair |
|---|---|
| Model | AVP 42 |
| Category | Air Conditioner |
| Language | English |
Focuses on safe handling and movement of the unit to prevent damage or injury.
Emphasizes upright transportation to prevent internal component damage and oil displacement.
Mandates turning off power before working on the unit due to hazardous line voltages.
Stresses adherence to all applicable plumbing, electrical, and building codes during installation.
Restricts servicing to qualified and experienced personnel for safety and proper operation.
Advises using common sense and being safety-conscious during all operations and interactions.
Explains the meaning of the safety alert symbol and signal words (DANGER, WARNING, CAUTION).
Provides an overview of the ModPac II™ line of vertical wall-mount air conditioners.
Details the refrigerant cycle (cooling) and heating mode operations of the unit.
Refers to schematic diagrams for understanding the unit's electrical system and components.
Guides on checking for concealed damage upon receipt and inspecting unit components before installation.
Outlines general requirements, site selection criteria, and essential considerations for proper installation.
Lists required installation kits, accessories, and additional hardware needed for mounting the unit.
Provides guidance on wall openings, duct clearance, and requirements for duct system design and installation.
Explains the location and adjustment of the fresh air hood for controlling outside air intake.
Details the installation procedure for the optional "V" damper system.
Instructions for attaching the bottom support bracket to the wall for unit mounting.
Step-by-step guide for physically mounting the air conditioner unit onto the installed bracket.
Covers high voltage and low voltage wiring procedures, including safety precautions and connections.
Procedure for verifying the proper operation of the cooling cycle after installation.
Procedure for verifying the proper operation of the heating cycle on equipped models.
Introduces troubleshooting principles and emphasizes understanding the unit's operation.
Provides a guide correlating common problems with likely causes and recommended corrections.
Outlines electrical tests and procedures for diagnosing compressor-related issues.
Explains the function and troubleshooting of electric heat control components and safety limits.
Presents technical data including CFM, static pressure, ship weight, and filter sizes.
Provides detailed physical dimensions and mounting hole locations for different models.
Recommends periodic servicing, including air filter replacement, coil cleaning, and drain checks.
Details the terms, conditions, limitations, and coverage of the product warranty.
