EasyManua.ls Logo

Marvel MLBV215 - Installing the Anti-Tip Device

Marvel MLBV215
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
INSTALLING THE ANTI TIP DEVICE
Front of cabinet
Figure
21
1
2"
(54.6 cm)
Anti-Tip
Bracket
Leveling Leg
Bottom View of
Appliance
Floor Mount Installation
The anti-tip bracket is to be located on the oor in the left or
right rear corner of the appliance as shown in “Figure 12”.
!
WARNING
ALL APPLIANCES CAN TIP
RESULTING IN INJURY.
INSTALL THE ANTI-TIP
BRACKET PACKED WITH
THE APPLIANCE.
FOLLOW THE INSTRUC-
TIONS BELOW
!
CAUTION
NOTE
Any nished ooring should be protected with appropriate
material to avoid damage when moving the unit.
If installing on a concrete oor, concrete fasteners are
required, (not included with the anti-tip kit).
Anti-Tip Device
!
WARNING
If your appliance is not located under a counter top
(free standing), you must use an anti-tip device in-
stalled as per these instructions. If the unit is removed
from its location for any reason, make sure that the
device is properly engaged with the anti-tip bracket
when you push the appliance back into the original
location. If the device is not properly engaged, there is
a risk of the appliance tipping over, with the potential
for property damage or personal injury.
*** FOR FULL INSTALLATION INSTRUCTIONS, REFER TO THE PRODUCT OWNER’S GUIDE
ONLINE AT WWW.MARVELREFRIGERATION.COM
12

Related product manuals