Need help?Do you have a question about the Marzocchi 888 CR and is the answer not in the manual?
Key warnings, safety recommendations, and essential pre-ride checks for safe suspension operation.
Guidance on selecting the correct riding style and understanding intended use for safety and performance.
Introduction to spring systems and the basic principles of damping adjustment.
Detailed explanation of Marzocchi's Dynamic Bleed Cartridge (DBC) systems and their variations.
Overview of Open Bath, Sealed Cartridge, Air Systems, and Spring Preload adjustment methods.
Critical steps for installing the fork on the frame and brake system, including safety precautions.
Instructions for installing wheels using various axle systems like QR15, QR20, and through axles.
Table providing air pressure settings based on rider weight for various fork models.
Information on changing fork travel using spacers and the need for authorized service.
Details warranty coverage, limitations, exclusions, and procedures for EU and global markets.
Outlines periodic maintenance tasks, frequency, and component tightening torque specifications.
General| Travel | 200 mm |
|---|---|
| Wheel Size | 26" |
| Spring Type | Coil |
| Axle Type | 20 mm Thru Axle |
| Intended Use | Downhill |
| Stanchion Diameter | 38 mm |
| Steerer Tube Diameter | 1 1/8" |
| Adjustments | Rebound, Compression |
| Type | Dual Crown |
To Next Page