Marzocchi Z1 Free Ride User Manual

Z1 Free Ride
1/45
Features
TECHNICAL CHARACTERISTICS
Fork with Ø32 mm legs with spring and
hydraulic rebound damping.
Adjustment of the hydraulic rebound
braking through the knob on the top of the
right leg.
Adjustment of the air preload on the right
leg.
The ETA cartridge in the left leg makes it
possible to limit the extension blocking the
rebound of the fork.
The stanchion tubes are pressed into the
crown with a cryogenic process.
New sliding system to improve the stiffness
and operation.
Magnesium alloy cast one-piece assembly,
CNC machined for lighter weight and more
stiffness.
Components subjected to friction are
lubricated and cooled by means of a
special oil.
Steer tube: steel or reinforced aluminium,
1-1/8", threadless.
Crown: BAM® aluminium alloy forged and
CNC machined.
Stanchions: aluminium.
Springs: constant pitch.
Sliding bushes: made of friction free and
wear free material.
Seals: computer designed oil seals that
guarantee the maximum seal in any
condition.
Oil: special formulated oil that prevents
foam and keeps the viscosity unchanged
while offering high performance; free from
static friction.
Dropout type: Standard or (optional) QR20
Plus in the standard version or in the new
"With Bolt" version.
Disk brake mount: XC International
Standard for 6" disk.
Options: integrated fender.
BAM®: Bomber Aerospace Material:
special alloy coming from the aerospace
industry.

Marzocchi Z1 Free Ride Specifications

General

Brand	Marzocchi
Model	Z1 Free Ride
Category	Bicycle Accessories
Language	English

Summary

Disassembling

Draining the Oil

Instructions for safely draining the oil from the fork, including proper disposal.

Breaking Down the Crown-Stanchion Unit / Arch-Slider Assembly

Guide to separate the crown-stanchion unit from the arch-slider assembly.

Removing the Hydraulic Cartridge – Right Leg

Procedure for removing the hydraulic cartridge from the right leg of the fork.

Removing the ETA Cartridge – Left Leg

Procedure for removing the ETA cartridge from the left leg of the fork.

Assembling

Mounting the Hydraulic Cartridge – Right Leg

Assembling the ETA Cartridge – Left Leg

Assembling the Crown-Stanchion Unit / Arch-Slider Assembly

Filling with Oil

Instructions for filling the fork with the correct type and amount of oil.

Settings

Rebound Adjustment

How to adjust the rebound damping using the adjuster knob on the right leg.

ETA (Travel Limiting Device)

Instructions for activating and deactivating the ETA function to limit fork travel.