5
166
Starting and Driving
WARNING!
Never activate ESC OFF Mode if a
compact spare wheel is mounted on
the vehicle. Loss of control may occur
and this could cause serious injuries or
death.
Setting Ride Height
The pneumatic suspension system
ensures vehicle continuous automatic
levelling and allows setting ground
clearance by entering the Suspension
Menu on the Comfort Display.
Suspensions can be set touching one of
the five different heights. Every position
is identified by the switch-on of the
corresponding light at the left side of the
car on the display and in the dedicated
area underneath the left dial of the
instrument cluster.
The table below shows the possible
selector positions and the relevant
symbols.
Off Road 2
Off Road 1
Normal
Aero 1
Aero 2
During transition from one position to
another, the instrument cluster display
will show a pop up indicator which
reproduces the ride height symbols. On
this soft-key, when vehicle is raising,
an arrow starts blinking together
with the corresponding target height
indicator; in the same way, when vehicle
is lowering, a arrow is displayed.
When the target height indicator is
reached, it stops blinking and the
corresponding arrow will disappear.
The new position will be displayed on
the dedicated area underneath the left
dial and the indicator will turn off after
approximately 15 seconds when raising
and 5 seconds when lowering by one
level.
To Next Page
Loading...
