EasyManua.ls Logo

Mash Fifty 50CC - Chapter 4 Fuel and Lubricant Recommendations

Mash Fifty 50CC
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
1.
Fuel
Chapter 4
Recommendations for fuel and engine
oil
Note :
If the engine produces ping noise, it may be caused by using of improper
fuel. Replace with correct fuel.
Do not use fuel SP95 E10.
2.
Lubricant
(Please refer to Regular Maintenance Table)
Use high quality 4-stroke engine oil to prolong engine life. Engine oil shall be
SE or SD product in API classification. Engine oil of proper viscosity shall be
used according to local air temperature. There are three viscosity levels
suitable for the engine, namely, SAE15W-40, SAE10W-30 and SAE5W-30.
Refer to the figure below:
Warning
Gasoline is inflammable and explosive. When handling gasoline, attention
should be paid to prevent burnt or accident.
In places where gasoline is stored or handled, shutdown the engine, do
not smoke, and keep away from naked flame or spark.
Refueling shall be made in a well ventilated place. After refueling,
immediately clean off any gasoline outside the fuel tank.
Prefer unleaded gasoline 95 (or 98) : This may prolong the service life
of spark plug.

Related product manuals