Chapter 8
Inspection and maintenance
The following table shows the interval of regular maintenance in travel
distance or number of months. At the end of an interval, be sure to carry out
the specified inspection, lubrication and maintenance. If your motorcycle is
used with heavy loads, such as high power driving in a dusty environment,
the maintenance shall be carried out more frequently. Your distributor can
give your further guide. The parts of steering gear, shock absorber, bearings
and wheels are critical components, and require professional skills to repair.
In the light of safety, it is advisable to the inspection and maintenance done
by your distributor or qualified maintenance staff.
Be sure to make regular maintenance thoroughly according to the
instructions in the manual
Precaution
In regular maintenance, it may be necessary to replace one or more
parts. For part replacement, it is advisable to use genuine parts or
equivalent products. No matter if you are experienced in vehicle
maintenance or not, the items with * mark shall be handled by your
distributor or qualified maintenance staff. For the items without such
mark, you can do it by yourself according to the instructions.
Warning
After correct running-in of 1000 km, maintenance is mandatory to
ensure the safety of your motorcycle and give it a full play of its
performance.
To Next Page
Loading...
