MASSEY FERGUSON 4609 - Operating Slope Angle

1.2.10 Operating slope angle
4608 4609 4610
Up/down 20 degrees
Side to side 20 degrees
1.2.11 Lubrication specifications
4608 4609 4610
Lubrication
Lubrication fittings Massey Ferguson M-1105 or equivalent lithium base grease No. 2
Engine oil Massey Ferguson Multiguard
®
or equivalent in the correct SAE
viscosity. Oil must meet or exceed MIL-L-46152 requirements, API
Service CJ-4, ACEA Service E7.
Engine oil viscosity
Transmission and differential
housing (including hydraulic
system)
AGCO Permatran
®
821XL
Front axle AGCO Permatran
®
821XL
Engine coolant
Freezing protection (original
factory fill)
-34 ºC
Recommended coolant 50/50 mixture ethylene glycol and water
1. Introduction
4608 / 4609 / 4610 Service Manual 1-9
4283492M3