8-48
Headlight beam adjustment
CAUTION:
It is advisable to have a dealer make this
adjustment.
To raise the beam, turn the adjusting screw
in direction 。
To lower the beam, turn the adjusting screw
in direction .
1. Headlight beam adjusting screw
Tail/brake light bulb replacement
If a tail/brake light bulb burns out, replace it
as follows:
1. Remove panel A (if replacing the left
tail/brake bulb) or panel B (if replacing
the right tail/brake bulb) by removing the
quick fasteners and bolts.
1. Panel A
To Next Page
Loading...
