To Next PageTo Next Page
Need help?Do you have a question about the Massimo BUCK 250 and is the answer not in the manual?
General| Brand | Massimo |
|---|---|
| Model | BUCK 250 |
| Category | Utility Vehicle |
| Language | English |
Overview of the owner's manual and congratulations on UTV purchase.
Key safety points for UTV operation and potential warranty voiding.
Guidelines for safe and responsible UTV operation and environmental respect.
Important notice emphasizing adult-only use and reading warnings before operation.
Emphasizes understanding the vehicle before starting to ride.
Explanation of warning symbols and signal words used in the manual.
Checklist for verifying the machine's proper working order before each ride.
Identifies and explains the function of various electrical switches on the control panel.
Diagram and labels for switches located on the UTV's control panel.
Details the operational states of the main switch (off, on, start).
Diagram and explanation of the UTV's LCD display indicators and controls.
Instructions for checking and operating the accelerator pedal for safe use.
Instructions for proper use of the brake pedal and associated warnings.
Details on locating, setting, and releasing the parking brake lever.
Explanation of the transmission gear selector positions and their functions.
Instructions for removing and securing the fuel tank cap.
Procedure for removing and installing the UTV seats.
Information on the three-point seat belts and their importance for safety.
Specifies the maximum weight capacity for the UTV's cargo bed.
Instructions for opening and closing the hood and associated safety warnings.
Safety precautions and specifications for handling fuel and oil.
Step-by-step instructions for starting the engine when cold.
Procedure for jump-starting the UTV if the battery is low.
Recommendations for essential protective gear for UTV riding.
Guidelines for safely loading and transporting cargo on the UTV.
Introduction to UTV handling characteristics and basic safety before operation.
Steps for practicing basic UTV operation in a safe, open area.
Advice on making turns safely, especially on rough terrain or at speed.
Guidance on effective braking techniques based on terrain conditions.
Techniques and precautions for safely climbing hills.
Procedures and warnings for safely descending hills.
Precautions and procedures for driving through shallow water.
Advice on navigating rough terrain safely and avoiding obstacles.
Tips for safely operating in areas with brush and trees.
Procedure for assessing and navigating obstacles on trails.
General instructions for parking the UTV safely.
Specific guidance and warnings for parking the UTV on inclines.
Procedure for properly breaking in the CVT clutches and drive belt.
Instructions for drying the CVT system after operating in water.
Step-by-step guide for safely removing the UTV battery.
Instructions for installing the battery and connecting cables correctly.
Prohibitions and cautions regarding tampering with the noise control system.
Procedure for cleaning and inspecting the spark arrester.
Information about the presence of a catalyst within the muffler.
Overview of scheduled maintenance tasks and responsibilities.
Defines conditions considered severe use, requiring more frequent maintenance.
Key to symbols used in the maintenance schedule (Inspect, Adjust, Replace, Clean).
Explanation of how maintenance intervals are determined and adjusted for usage.
Specific maintenance tasks required during the initial 5-hour break-in period.
Maintenance schedule for 10 hours or 100 miles of operation.
Maintenance schedule for 25 hours or 250 miles of operation.
Maintenance schedule for 50 hours or 500 miles of operation.
Maintenance schedule for 75 hours or 750 miles of operation.
Maintenance schedule for 100 hours or 1000 miles of operation.
Maintenance schedule for 125 hours or 1250 miles of operation.
Maintenance schedule for 150 hours or 1500 miles of operation.
Maintenance schedule for 175 hours or 1750 miles of operation.
Maintenance schedule for 200 hours or 2000 miles of operation.
Maintenance schedule for 225 hours or 2250 miles of operation.
Maintenance schedule for 250 hours or 2500 miles of operation.
Recommended lubricants for various UTV components and intervals.
Chart for recording completed periodic maintenance work and dates.
Specifications for tightening wheel nuts to ensure proper wheel security.
Critical operations for wheel bearing tightness and spindle nut retention.
Procedure for adjusting the shock absorber spring tension.
Instructions for inspecting, cleaning, and replacing the air filter.
Overview of steering system inspection and lubrication.
Checks for loose parts, cable routing, and smooth operation of the steering assembly.
Recommended lubricant for steering pivoting parts.
Note that camber and caster adjustments are non-adjustable.
Procedure for checking and adjusting toe alignment; warnings against DIY.
General information and checks for the front and rear brake systems.
Details on hydraulic disc brakes, fluid checks, and pad wear.
Information on the rear hydraulic disc brake and pad wear inspection.
Procedure for checking and maintaining proper brake fluid level.
Lubrication points for brake and accelerator pedals.
Procedures for checking and adjusting the parking brake for proper function.
Steps to verify the parking brake is correctly adjusted and operational.
Detailed steps for adjusting the parking brake caliper for pad wear.
Procedure to measure and ensure correct throttle pedal free play.
Inspection, cleaning, and gap adjustment for spark plugs.
Instructions for safely removing and installing spark plugs.
Procedures for checking and changing the engine oil.
Steps to check the engine oil level and ensure it is within the safe range.
Detailed steps for performing an engine oil and filter change.
Procedure for changing the transmission fluid.
Steps to drain and refill the transmission with the correct amount of lubricant.
Instructions for lubricating and adjusting the drive chain tension.
Specifications for drive chain deflection measurement.
Safeguards and procedures for maintaining wheels and tires.
Key precautions for tire pressure, types, and wheel installation.
Guidance on checking and maintaining proper tire pressure.
Step-by-step guide for safely removing a UTV wheel.
Steps for properly installing a UTV wheel, including nut tightening.
Guideline for when tires should be replaced based on tread wear.
Importance of clean headlights and taillights for safe riding.
Instructions for adjusting headlight brightness cut-off line.
Procedure for replacing a non-working taillight or brake light bulb.
Guidance on cleaning the UTV to extend component life.
Recommended methods and cautions for washing the UTV.
Advice on waxing the UTV's body finish.
Guidelines for UTV storage, including fuel, oil, and battery care.
Instructions for battery maintenance during storage.
Recommendations for UTV storage area and cover selection.
Measures to take when transporting the UTV.
Troubleshooting common causes and solutions for CVT burning.
Troubleshooting common causes and solutions for low battery issues.
Common causes and solutions for starting failures or hard starting.
Troubleshooting steps related to fuel tank, filter, and pressure.
Troubleshooting issues related to cylinder, head, and valve systems.
Troubleshooting steps for ignition system components like battery and coils.
Diagnosing and resolving issues affecting idle speed performance.
Troubleshooting issues affecting medium and high speed performance.
Troubleshooting causes for generally poor speed performance.
Troubleshooting causes and solutions for engine overheating.
Troubleshooting clutch issues when the engine runs but the UTV does not.
Troubleshooting causes and solutions for clutch slipping.
Troubleshooting causes for poor starting and faulty brake performance.
Troubleshooting common causes of ineffective or poor braking.
Detailed dimensions and fluid capacities of the UTV.
Specifications for tires, pressure, and drive system components.
Specifications for front, rear, and parking brakes.
Specifications for the front and rear suspension systems.
Specifications for the engine, including cooling and capacity.
Specifications for electrical components, including lamps and fuses.
Overview of the emission control system warranty and coverage.
Details on conditions that void the emission control system warranty.
Statement regarding the limits of liability for warranty claims.
