OWNER’S/OPERATOR’S MANUAL 20.0
16. MAINTENANCE
16- 24
4. Securely tighten the wheel nuts
according to the chart found in “16.MAINTENANCE/ Wheel Nut
Torque”.
Tire Inspection
When replacing a tire always use original equipment size and type.
Tire Tread Depth
Always replace tires when tread depth is worn
to 1/8” (3mm) (1) or less. Please refer to your
Owner’s Manual for tire specifications.
LIGHTS
Keep your headlights and taillights clean. Poor light while riding can
result in an accident causing severe injury or death.
Do not service while headlight is hot. Serious burns may result.
Do not touch a halogen lamp with bare fingers. Oil from your skin
leaves a residue, causing a hot spot which will shorten the life of the
lamp.
Headlight Lamp Replacement and Adjust
1. To lower headlight brightness cut-off line, turn adjusting bolt (1)
counterclockwise. And to raise brightness cut-off line, turn the bolt
To Next Page
Loading...
