OWNER’S/OPERATOR’S MANUAL 20.0
16. MAINTENANCE
16- 4
10 HOUR / 100 MILE (160 KM) SERVICE
Valve Clearance
(Break-in)
Valve lash adjustment: Every 50 hours
after first 10–hour adjustment
25 HOUR / 250 MILE (400 KM) SERVICE
Inspect; cycle key to pressurize fuel
pump; check lines and fittings for leaks
and abrasion
Check terminals; clean; test
50 HOUR / 500 MILE (800 KM) SERVICE
Inspect; cycle key to pressurize fuel
pump; check lines and fittings for leaks
and abrasion
Check terminals; clean; test
Inspect level; change yearly
Valve lash adjustment: Every 40 hours
after first 10-hour adjustment
Lubricate all fittings, pivots, cables, etc.
Inspect, lubricate, adjust
Throttle Body Intake
Duct
Inspect duct for proper sealing/air leaks
75 HOUR / 750 MILE (1200 KM) SERVICE
Inspect; cycle key to pressurize fuel
pump; check lines and fittings for leaks
and abrasion
Check terminals; clean; test
Inspect level; change yearly