Massimo Alligator 700-4 - How to Measure Tire Pressure

5-12
3．
．．
． Use no more than the following
pressures when seating the tire
beads.
Front 250kpa (2.5kgf/cm
2
,36psi)
Rear 250kpa (2.5kgf/cm
2
,36psi)
Higher pressures may cause the tire
to burst. Inflate the tires very slowly
and carefully. Fast inflation could
cause the tire to burst.
How to measure tire pressure
Use the tire pressure gauge.
NOTE:
The tire pressure gauge is included as stan-
dard equipment. Make two measurements of
the tire pressure and use the second reading.
Dust or dirt in the gauge could cause the first
reading to be incorrect.
Set pressure with tires cold.
Set tire pressures to the following specifica-
tions:
Recommended
pressure
Minimum Maximum
Front
70kpa
(0.70kgf/ cm
2
,
10pai)
63kpa
(0.64kgf/ cm
2
,
9pai)
77kpa
(0.77kgf/ cm
2
,
11pai)
Rear
70kpa
(0.70kgf/ cm
2
,
10pai)
63kpa
(0.64kgf/ cm
2
,
9pai)
77kpa
(0.77kgf/ cm
2
,
11pai)