EasyManua.ls Logo

Massimo MSU 300 - Page 20

Massimo MSU 300
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Sequence
number
Category
Checking item
Adjusting content
1
Engine
Engine oil level; leakage
situation, cooling water level
Oil level is between
upper and lower limit;
engine oil, cooling
liquid, fuel and other
mediums do not have
any leakage; clean
empty filter periodically
2
Steering
organization
Operate flexibly without any
block phenomenon
Each linking drag pole,
ball head and locking
nut are tightened.
3
Brake
Brake liquid height; brake
pedal travel and free travel;
brake performance
4
Tire
Air pressure, thread, crack
and wound
Tire pressure:
F. tire: 148kpa (21PSI)
R. tire: 197kpa (28PSI)
Thread depth no less
than 1.6mm
5
Lamplight
Illumination, signal and
loudspeaker
Every kind of
lamplights, signal
switches and buttons,
etc
6
Battery
Liquid height in storage
cell(except the
maintenance-free battery)
Liquid surface should be
between upper and
lower limit marked, it is
necessary to note only
distilled water could be
filled in storage cell
7
Instrument
Display is normal and correct
8
Dump Bed
and
self-saving
winch
Work normally

Related product manuals