Do you have a question about the Massive Audio BP200.2 and is the answer not in the manual?
| RMS Power at 4 Ohms | 200W x 2 |
|---|---|
| RMS Power at 2 Ohms | 300W x 2 |
| RMS Power Bridged at 4 Ohms | 600W x 1 |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| Frequency Response | 20Hz - 20kHz |
| S/N Ratio | >90dB |
| Damping Factor | >200 |
| Low Pass Crossover Frequency | 50Hz - 250Hz |
| High Pass Crossover Frequency | 50Hz - 250Hz |
| Bass Boost Frequency | 45Hz |
| Fuse Rating | 30A x 2 |
| Crossover Type | Variable HP/LP/Full |
| Bass Boost | 0 to +12dB |
| Input Sensitivity | 0.2V - 6V |