Need help?Do you have a question about the Massive Audio DB3000 and is the answer not in the manual?
General| Power Output | 3000W |
|---|---|
| Channels | 1 |
| Input Sensitivity | 0.2V - 6V |
| RMS Power at 1 Ohm | 3000W |
| RMS Power at 2 Ohms | 1500W |
| RMS Power at 4 Ohms | 750W |
| Subsonic Filter | 10Hz - 50Hz |
| Signal to Noise Ratio | 90dB |
| THD | 0.1% |
| Phase Shift | 0° - 180° |
| Bass Boost | 0dB - 12dB |
| Damping Factor | >200 |
Lists protection features (short circuit, thermal) and linkable models via single RCA.
Instructions for BATT+, REM, and GND terminal connections, including fuse recommendations.
Strongly recommends installation by an authorized dealer for optimal performance and warranty.
Specifies required fuse sizes and wire gauges for each model, and fuse placement near the battery.
Lists RMS power output for each model (DB1000, DB2000, DB3000, DB8000) at various impedance loads.
Guides on checking fuses, connections, and settings for Power LED not lighting up or no sound.
Provides steps to diagnose and fix issues with one channel not functioning, checking RCA and speaker connections.
Details the one-year warranty for authorized dealer installations and 90 days for others.
To Next Page
