Need help?Do you have a question about the Massive BLX4 and is the answer not in the manual?
Features a protective coating for moisture, dust, and heat resistance.
Suitable for 1 Ohm loads for models BL1/BL3.
Protects the amplifier from various fault conditions.
Instructions for connecting speakers and subwoofers to terminals.
Guide for connecting the power terminal with a fuse or breaker.
Explains automatic turn-on via DC offset or REM IN connection.
Details for making a proper chassis ground connection.
Information on connecting low-level RCA or high-level speaker outputs.
Switch for selecting LPF, HPF, or Full mode for crossover frequencies.
For connecting an optional high-voltage capacitor to stabilize voltage.
LED status for power and protection modes.
Steps to resolve issues when the amplifier does not turn on.
Remedies for when the protection indicator light is illuminated.
Solutions for when there is no sound output from the amplifier.
Advice on preventing the amplifier from overheating.
General| Type | Class D |
|---|---|
| Channels | 4 |
| Crossover Frequency | 50Hz - 500Hz |
| Minimum Impedance Unbridged | 2 Ohm |
| Minimum Impedance Bridged | 4 Ohms |
To Next Page
