Need help?Do you have a question about the Mastech HY1520EX and is the answer not in the manual?
General| Output Voltage | 0-15V |
|---|---|
| Output Current | 0-20A |
| Line Regulation | ≤ 0.01% + 3mV |
| Ripple & Noise | ≤ 1mVrms |
| Operating Temperature | 0°C to 40°C |
| Input Voltage | 220V ±10%, 50/60Hz |
| Load Regulation | ≤0.01% + 3mV |
| Voltage Accuracy | ± (0.5% + 2 digits) |
| Current Accuracy | ± (0.5% + 2 digits) |
Details AC input voltage, rating, and operating environment specifications including indoor use, dry air, and altitude limits.
Detailed descriptions and explanations of the various components and indicators on the front panel of the power supply.
Detailed descriptions and explanations of the various connectors, switches, and components on the back panel of the power supply.
Lists the key technical specifications and performance parameters of the power supply, such as voltage and current stabilization.
Provides guidance on preparing the power supply for operation, including AC outlet connection and voltage matching.
Explains the automatic crossover behavior between Constant Voltage (CV) and Constant Current (CC) modes based on load conditions.
Step-by-step instructions for operating the power supply, covering various modes and applications.
Instructions on how to set a specific current limit when operating the power supply in Constant Voltage (CV) mode.
Guidance on how to adjust and set the over-voltage protection limit for the power supply.
Procedures for safely replacing a blown fuse in the power supply, including warnings about fuse type and rating.
Steps to reset the power supply after the Over-Voltage (OV) protection has been triggered.
Information on how the power supply recovers from over-temperature conditions and common causes of overheating.
To Next Page
