Mastech M266 Series User Manual

6. BATTERY REPLACEMENT
If the sign“BAT”appears on the LCD display, it indicates that battery
should be replaced. Remove the battery cover of case. Replace the
exhausted battery with a new one.
WARNING
Before attempting to open the battery cover, be sure that test
leads have been disconnected from measurement circuits to avoid electric
shock hazard.
WARNING
Using this appliance in an environment with a strong radiated
radio-frequency electromagnetic field (approximately 3V/m) may influence
its measuring accuracy.
HYS005448
M266 SERIES
DIGITAL
CLAMP MULTIMETER
OPERATOR’S
INSTRUCTION MANUAL

Mastech M266 Series Specifications

General

Brand	Mastech
Model	M266 Series
Category	Multimeter
Language	English