Need help?Do you have a question about the Mastech MAS830L and is the answer not in the manual?
General| DC Voltage Range | 200mV/2V/20V/200V/600V |
|---|---|
| AC Voltage Range | 200V/600V |
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ |
| Continuity Buzzer | Yes |
| Diode Test | Yes |
| Transistor Test | Yes |
| Power Supply | 9V battery |
| Display | LCD |
| DC Current Range | 200μA/2mA/20mA/200mA/10A |
| Dimensions | 138mm x 69mm x 31mm |
Visual indicators for hazards like high voltage and double insulation.
Notices for safe use, including input limits and proper probe handling.
Notices before operation, including battery status and switch settings.
Steps for connecting probes and setting the correct range for DC voltage.
Warning about exceeding 600V and the risk of damage or electric shock.
Instructions for connecting probes and setting ranges for DC current.
Crucial safety warning to disconnect probes before testing transistors.
Ensures the rear cover is securely fastened before operating the instrument.
Critical warning about disconnecting probes and securing covers to prevent shock.
To Next Page
