Need help?Do you have a question about the Mastech MS2203 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Auto Range | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| MAX/MIN | Yes |
| Back Light | Yes |
| Auto Power Off | Yes |
| Type | Digital Multimeter |
| DC Current Range | 10A |
| AC Current Range | 10A |
| Frequency Range | 10Hz-10MHz |
| Duty Cycle | 0.1% ~ 99.9% |
| Temperature | -40°C to 1000°C |
Provides essential safety guidelines and alerts for using the instrument.
Detailed steps for measuring AC voltage accurately with the device.
Instructions for measuring AC current using the clamp meter's jaws.
Guide for measuring power parameters in single-phase electrical circuits.
Steps for measuring power parameters in three-phase, four-wire electrical systems.
To Next Page
