Need help?Do you have a question about the Mastech MS8211D and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Data Hold | Yes |
| Continuity Buzzer | Yes |
| Operating Temperature | 0°C to 40°C |
| Measurement Functions | AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Continuity, Diode Test |
| AC Voltage Range | 0-750V |
| DC Voltage Range | 0-1000V |
| Resistance Range | 0-20MΩ |
| Capacitance Range | 0-100μF |
| Frequency Range | 0-10MHz |
| Battery | 9V |
Ensures user observes safety rules and checks meter condition before use.
Provides guidelines for safe operation, including selecting ranges and avoiding contact.
Explains critical safety symbols and measurement category indicators used in the manual.
Covers essential maintenance procedures, battery replacement, and safe storage practices.
Identifies and lists all the physical parts and controls of the digital multimeter.
Details the function and operation of each button, switch, and display element.
Outlines environmental conditions, power, dimensions, and general operating parameters.
Provides detailed ranges, accuracy, overload protection, and input impedance for measurements.
Explains how to freeze the current reading on the display and disable auto power-off.
Describes the function to measure and hold the peak value during voltage measurements.
Details how to switch between different measurement modes like voltage, resistance, and current.
Explains the use of auto and manual ranging for voltage and resistance measurements.
Informs about the meter's automatic power-down feature and how to disable or reset it.
Guides on selecting the correct range and connecting probes before taking measurements.
Provides step-by-step instructions and safety precautions for measuring DC voltage.
Details the procedure and safety warnings for measuring AC voltage accurately.
Explains how to measure resistance, including precautions for in-circuit testing.
Guides on performing diode tests and interpreting the forward voltage drop readings.
Describes how to check circuit continuity, including the audible buzzer function.
Provides instructions for safely measuring DC current in a circuit.
Details the procedure and safety precautions for measuring AC current.
Explains how to test logic levels using LED indicators and LCD readings.
Instructions on how to safely replace the meter's batteries when the low battery indicator appears.
Guidance on replacing test leads and clips to maintain safety and accuracy.
To Next Page
