Mastech MS8211D User Manual

09 10
Function
3.2.4 Continuity
Built-in buzzer will sound, if resistance
is lower than 50Ω.
Range
- Open circuit voltage: approx. 0.5V
- Overload Protection: 250V DC or rms AC
3.2.5 Diode
Function
Display :read approximate
forward voltage of diode
Range
Resolution
0.001V
- Forward DC Current: approx. 1mA
- Reversed DC Voltage: approx.1.5V
- Overload Protection: 250V DC or rms AC
-Input Impedance: approx. 1MΩ- Overload
Protection: 250V DC or rms AC
3.2.3 Resistance
0.1Ω
0.001KΩ
200Ω
0.01KΩ
0.1KΩ
2MΩ
Range
Resolution
Accuracy
2KΩ
20KΩ
200KΩ
0.001MΩ
± (1.0% of rdg + 5 digits)
20MΩ 0.01MΩ
± (1.0% of rdg + 1 digits)
± (1.0% of rdg + 3 digits)
- Open Circuit Voltage: 0.25V
- Overload Protection: 250V DC or rms AC
3.2.6 DC Current
AccuracyRange
Resolution
20mA
200mA
0.1mA
0.01mA
± (1.5% of rdg +3 digits)
3.2.7 AC Current
AccuracyRange
Resolution
20mA
200mA
0.1mA
0.01mA
± (2.0% of rdg +3 digits)
- Overload Protection: Resettable fuse.
- Frequency Range: 40Hz-200Hz
- Response: Average, calibrated in rms of sine wave.
3.2.8 Logic Test
0V 1.5V 3.5V
5V
Low "0" High "1"
Green
LED on
Green, Red
LED off
Red LED
on
Description
Range
Logic
4. OPERATING INSTRUCTION
4.1 Data Hold
If you need data hold when measuring, you can put on
“DATA-H” button, it will hold the reading; if you put the
button again, data hold is not continue.
- Overload Protection: Resettable fuse.

Mastech MS8211D Specifications

General

Brand	Mastech
Model	MS8211D
Category	Multimeter
Language	English