Mastech MS2108 - 3.2.8 Duty Cycle Specifications; 3.2.9 Resistance Specifications; 3.2.10 Diode Test Specifications; 3.2.11 Continuity Test Specifications

13 14
3.2.7.2 By V range:
Accuracy
Resolution
0.1Hz
0.001kHz
Range
660Hz
6.6kHz
0.01kHz 10kHz
>10kHz
Take it only as referance
±(1.5% of rdg + 5 digits)
- Measurement range: 10 ~ 10kHz
- Input voltage range:>0.2V rms AC (higher input
 voltage at higher frequency)
- Input impedance: 10MΩ
- Max. input voltage: 600V rms AC
3.2.8 Duty Cycle
Accuracy
Resolution
0.1%
Range
10 - 95% ±3.0%
3.2.8.1 By A range ( from current clamp):
- Frequency response: 10 ~1kHz
- Input current range:>1A rms AC (higher input current
at higher frequency)
- Max. input current: 600A
3.2.8.2 By V range:
- Frequency response: 10 ~ 10 kHz
- Input voltage range:>0.2V rms AC (higher input
voltage at higher frequency)
- Input impedance: 10MΩ
- Max. input voltage: 600V rms AC
Accuracy
Resolution
0.1Ω
0.001kΩ
Range
660Ω
6.6kΩ
0.01kΩ 66KΩ
0.1kΩ
660kΩ
±(1.2% of rdg + 2digits)
0.001MkΩ 6.6MΩ
0.1MΩ66MΩ
- Open circuit voltage: 0.4V
- Overload protection: 250V DC or rms AC
3.2.9 Resistance
±(2.0% of rdg + 5digits)
3.2.10 Diode
Function
Resolution
Range
displaying approximate
forward voltage of diode
0.001V
- Forward DC current~1mA
- Reversed DC voltage~3.3V
- Overload protection: 250V DC or rms AC
Resolution
Range
Built-in buzzer will sound,
if resistance is lower than
30.
0.1Ω
- Open circuit voltage~1.2V
- Overload protection: 250V DC or rms AC
3.2.11 Continuity
0.01kHz
Function