To Next PageTo Next Page
Need help?Do you have a question about the Mastech MS2205 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Display | LCD |
| AC Current Range | 0-10A |
| DC Current Range | 0-10A |
| Capacitance Range | 0-100μF |
| Frequency Range | 0-10MHz |
| Temperature Range | -20°C to 1000°C |
| Battery | 9V |
| Safety Rating | CAT III 600V |
Essential safety precautions and warnings before using the meter.
Guidelines for safe operation adhering to international standards.
Explanation of important safety symbols used in the manual.
An overview of the meter's capabilities and intended use.
Details on the meter's measurement capabilities and advanced functions.
Visual identification of the meter's components and design.
Explanation of the knob's positions for power and measurement modes.
List and function of each button on the meter.
How to use the WATT button for power measurements.
How to use the MODE button for display switching.
How to use the U button for voltage testing.
How to use the I button for current testing.
How to use the READ button for data retrieval.
How to use the RS232 button for PC data transfer.
Operations for clearing data, backlight, and range selection.
Using buttons for data recording, saving, and holding.
Understanding the symbols and readings on the digital display.
Explains the meaning of various symbols displayed on the LCD screen.
Step-by-step guide for measuring AC voltage.
Details on connecting test wires for voltage measurements.
Step-by-step guide for measuring AC current.
How to measure AC current using the clamp.
Procedure for measuring single-phase power parameters.
Measuring and interpreting power factor and phase angle.
Measuring power and factor in a 3-wire circuit.
Procedure for measuring 3-phase power in balanced loads.
How to perform and interpret phase sequence tests.
Measuring power in unbalanced 3-phase 4-line circuits.
How to save measurement results into the meter's memory.
Connecting the meter to a PC for data transfer.
Information on voltage/current limits and safety indicators.
How to activate and use the LCD backlight.
Explanation of the automatic power-off feature and its control.
Graphical representation of power measurements.
How the meter indicates low battery status.
Instructions and warnings for replacing batteries.
Overall specifications including safety compliance and display.
Details on accuracy, frequency, and operating conditions.
Table of AC voltage ranges, accuracy, and input impedance.
Table of AC current ranges, accuracy, and resolution.
Table of single-phase power ranges, accuracy, and resolution.
Table of 3-phase power ranges, accuracy, and resolution.
Specifications for power factor and passive power measurements.
Accuracy and resolution for frequency measurements.
Precision for harmonic voltage measurements based on harmonic number.
List of items included with the meter.
Details on warranty period and after-sales service.
Cases where free service does not apply.
