Need help?Do you have a question about the Mastech MS2002 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Display Type | LCD |
| Display Counts | 2000 |
| Continuity | Yes |
| Diode Test | Yes |
| Power Supply | 9V Battery |
| Temperature Range | -20°C to 1000°C |
| DC Voltage Range | 200mV/2V/20V/200V/600V |
| DC Current Range | 200µA/2mA/20mA/200mA/10A |
| AC Current Range | 200µA/2mA/20mA/200mA/10A |
| Capacitance Range | 20nF/200nF/2μF/20μF |
| Frequency Range | 20kHz |
| Display Digits | 3.5 |
| Weight | 350g |
User precautions for safe and accurate operation, including lead usage and environmental factors.
Explanation of symbols used on the meter and in the manual for safety awareness.
Guidelines for maintenance and calibration, emphasizing professional service and protective measures.
Identification and description of the physical components and controls on the meter's panel.
Details the various icons and indicators shown on the digital display of the clamp meter.
Explains the operation and function of the HOLD, ON/OFF, and LIGHT keys on the meter.
Describes the function of the transformer jaws for AC current measurement.
Identifies the V/Ω and COM input sockets for connecting test leads.
Provides general technical specifications and operating environmental conditions for the clamp meter.
Details the accuracy specifications and conditions, including ambient temperature and humidity.
Specifies the range, resolution, and accuracy for AC current measurements.
Specifies the range, resolution, and accuracy for DC voltage measurements.
Specifies the range, resolution, and accuracy for AC voltage measurements.
Specifies the range, resolution, and accuracy for resistance measurements.
Specifies the range, resolution, and accuracy for audible continuity tests.
Step-by-step guide for measuring AC current using the clamp meter.
Step-by-step guide for measuring DC voltage using the clamp meter.
Step-by-step guide for measuring AC voltage using the clamp meter.
Step-by-step guide for measuring resistance using the clamp meter.
Step-by-step guide for performing audible continuity tests with the clamp meter.
Instructions for cleaning and maintaining the clamp meter to ensure longevity and performance.
Procedure for safely replacing the meter's battery when the low battery indicator appears.
To Next Page
