Millivolt Range and Resolution
Mode Range Display Resolution
mV
-10mV～75mV
0.01mV
Safety Information
Warning
To avoid possible electric shock or personal injury:
Never apply more than 30 V between the TC terminals, or between either TC terminal and
earth ground.
Make sure the battery door is closed and latched before you operate the calibrator.
Remove an attached thermocouple miniplug from the calibrator before you open the
battery door.
Do not operate the calibrator if it is damaged.
Do not operate the calibrator around explosive gas, vapor, or dust.
When servicing the calibrator, use only specified replacement parts.
Explanation of International Symbols
To Next Page
Loading...
Need help?
General
