MS8218 True RMS Multimeter
Introduction to the Meter
Tabel1 (continue)
10
AC
Indicating it is now in the AC measurement state, while DC and AC
displaying simultaneously, indicating it is DC+AC measurement
11
Indicating the measurement vale being negative
12
DC
Indicating it is now in the DC measurement state, while DC and AC
displaying simultaneously, indicating it is DC+AC measurement
13
Indicating it is now in the data-holding state
14
Please Wait ...
When measuring 50
μ
F
～
5000
μ
F capacitor under automatic range, for
ensuring the accuracy of measurement, it is necessary to perform the
measurement after fully discharging capacitor while prompting the
operator to wait
15
Analog bar, indicating the measurement value with a graphic mode
16
Indicating the meter being in the state for sending data to the RS-232C
interface of computer
17
The display zone for the meter’s measurement value, showing all the
measurement values
10
To Next Page
Loading...
Need help?
General
