Need help?Do you have a question about the Mastech MS8250D and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Current | 10A |
| Diode Test | Yes |
| Battery | 9V |
| Continuity | Yes |
| Duty Cycle | 0.1% to 99.9% |
| Display | LCD |
| Max Voltage | 1000V DC or 750V AC |
| DC Current | 10A |
| AC Current | 10A |
| Capacitance | 40nF/400nF/4µF/40µF/100μF |
| Frequency | 10MHz |
| Temperature | -20°C to 1000°C |
| DC Voltage | 600V |
| AC Voltage | 600V |
Steps to take before using the meter, including checking for damage and lead condition.
Guidelines for safe and proper operation of the multimeter.
Explanation of important safety symbols used in the manual and on the device.
Procedures for safe maintenance, including repairs, cleaning, and battery replacement.
Identification and list of the multimeter's components and features.
Details on the function of each button and the purpose of input jacks.
Explanation of the symbols and readings shown on the multimeter's LCD screen.
Overview of the multimeter's general technical characteristics and capabilities.
Explains the benefits of True RMS for non-sinusoidal signals.
Lists ranges, resolutions, and accuracy for DC voltage measurements.
Details ranges, resolutions, and accuracy for AC voltage measurements.
Provides ranges, resolutions, and accuracy for resistance measurements.
Details ranges, resolutions, and accuracy for capacitance measurements.
Describes the diode test procedure and expected output.
Explains the continuity test function and buzzer indication.
Specifies ranges, resolutions, and accuracy for frequency measurement in V mode.
Lists ranges, resolutions, and accuracy for frequency measurements.
Details the measurement of duty cycle.
Lists ranges, resolutions, and accuracy for DC current measurements.
Details ranges, resolutions, and accuracy for AC current measurements.
Instructions on how to hold the current reading on the display.
Guide to switching between auto and manual ranging modes.
Explanation of how to use the relative measurement function.
Instructions for using the MAX/MIN recording feature.
How to switch between different measurement functions like AC/DC or resistance modes.
Information on how to turn the LCD backlight on or off.
Details on the automatic power-off feature and how to disable it.
Steps for connecting the meter to a PC for data transfer.
Guide to using the NCV function for detecting voltage without contact.
Step-by-step guide on measuring DC and AC voltage.
Instructions for performing resistance measurements.
How to use the continuity test function.
Procedure for conducting a diode test.
Steps for measuring capacitance values.
Instructions for measuring frequency and duty cycle.
Guide to measuring DC and AC current.
Procedure for safely replacing the meter's battery.
Guidance on replacing test probes if damaged.
Lists all included accessories with the meter.
To Next Page
