Replacing the Battery and Fuse
1. Under normal circumstances, the fuse does not need to be replaced. Power off
the instrument and remove the test leads before proceeding with fuse or battery
replacement. Unscrew the screws on the back cover to open the case.
2. The fuse specifications for this instrument are: F200mA/250V and F10A/250V
fast-blow type. The replacement fuse must be of the same specification.
3. Use the same type of battery when replacing the battery.
4. After replacing the battery or fuse, the back cover must be securely tightened
before using the instrument.
Warning
⚫ To avoid electric shock, ensure that the test leads are disconnected from the
circuit before opening the back cover.
⚫ Before using the instrument, ensure that the back cover is securely fastened.
Accessories
User manual: ×1 Test leads: ×1 set
Carrying case: ×1 Rubber sleeve: ×1
Temperature Probe: ×1 Battery: 1.5V AAA ×2
To Previous Page
Loading...
