Mastech MS8910 User Manual

3-3. LCD Display
No.
Indicator
Meaning
1
SCAN
Auto Scanning Mode
2
AUTO
Auto Ranging
3
Data Hold
4
Diode checking Mode
5
`
Continuity Checking Mode
6
numF
Capacitance Units(nF, uF, mF)
7
MKΩ
Resistance Units(Ω, KΩ, MΩ)
8
Low Battery Indicator
4. Specification
4-1. General Feature
● 3000 count LCD display.
● Full automatic measurement:
Auto scanning the Resistance/Capacitance/Diode.
● Function selection by one “FUNC” Push Button
● Data Hold function
● Continuity Checking function
● Over Load Indication ( ‘OL’)
● Low Battery Indication
● Power Supply: 3V Lithium Battery (CR2032) , 1pc
● Test Pins is Gold-Plated.
● Auto Power OFF. If the Tester is idle for more than 10 minutes,
The Tester automatically turns the power off.
● Operating temperature & Humidity: 0 ~ 40℃(32 ~104 ℉) & < 80%
RH
● Storage temperature & Humidity: -10 ~ 50℃ (14 ~ 122 ℉) &
<70%RH
● Safety Class: IEC1010-1, CAT II
● EMC： According to CE regulation 89/336.
● Dimension (L x W x H) & Weight: 170 x 31 x 17mm, Approx. 48.6 g
● Environmental condition: （1）Indoor use；
（2）Altitude up to 2000meter.

Mastech MS8910 Specifications

General

Brand	Mastech
Model	MS8910
Category	Test Equipment
Language	English