1918
MAINTENANCE AND TROUBLESHOOTING
No Sound:
Check to make sure all plugs
are fitted completely into their
jacks, both in the headphones
and at the audio source.
Check source device to make
sure sound is coming out.
Check cable for signs of
extreme wear or test another
cable to see if cable is damaged.
Remote not working:
Check to ensure that source
plug is inserted into audio
device and headphone plug is
inserted into earcup.
Clean ear pads and headphones
with soft, slightly damp cloth.
Do not soak, submerge or allow
moisture to enter near the
drivers or cable jacks. Ear pads
and cables can be purchased
if they are worn out at:
www.masterdynamic.com
Do not drop, sit on, or allow
the headphones to be exposed
to water, moisture, or
temperature extremes.
It is recommended that you
return your headphones to
their storage case when not
in use. To avoid damage, do
not store other items in the
canvas case along with your
headphones.
CAUTION: Incorrectly rotating
or over rotating the earcups
can damage the headphones.
•
•
•
•
EN
To Next Page
Loading...
Need help?
General
