The first time you take both earphones out of their case they will enter pairing
mode.
STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW08S.
STEP 3: (OPTIONAL) Download and open the M&D Connect app.
To manually activate pairing mode, hold down the multi-function button until the
indicator light starts pulsing/pairing tone is heard.
NOTE: If you are already connected to a device, remove the earphones from your
ears to avoid activating your voice assistant.
Your earphones can connect to one Bluetooth device at a time.
PAIRING
5
MOBILE APP
Download the M&D Connect app for the complete Master & Dynamic experience.
MW08 SPORT should be connected to your phone in the Bluetooth menu
settings prior to using the M&D Connect app.
USE THE M&D CONNECT APP TO ACCESS:
• Firmware updates
•
Custom settings
•
Product support
PULSING INDICATOR LIGHT
MULTI-FUNCTION BUTTON
To Next Page
Loading...
Need help?
General
