Turn the switch to the “OFF” position and disconnect the
machine from power source before servicing or disassem-
bling any components.
CLEANING
• Keep machine and workplace clean. Avoid
accumulation of sawdust on the tool.
• Be certain the motor is kept clean and free of dust.
• Use soap and water to clean painted parts, rubber parts
and plastic guards.
LUBRICATION
• A light coat of paste wax on the work table will make it
easier to feed the workpiece and prevent rust.
KEEP TOOL IN REPAIR
• If power cord is worn, cut or damaged in any way, do
not operate the machine.
• Replace any worn, damaged, or missing parts. Use
parts listed to order parts.
• Any attempt to repair motor may create a hazard unless
repair is done by a qualified service technician.
• Call the customer line at 1-877-393-7121.
MAINTENANCE
8
WARNING
To Next Page
Loading...