What to do if my Master-force 260-9509 Battery Charger shows 'CHARGE ABORTED-BAD BATTERY'?
If your Master-force Battery Charger displays 'CHARGE ABORTED-BAD BATTERY', it means the battery is either bad or too large for the charger. Disconnect the charger from the AC outlet, remove the clamps, and do not attempt to charge the battery further. Have the battery checked or replaced, or use a charger with a higher amp rate.
What to do if the Master-force 260-9509 display shows 'CONNECT CLAMPS'?
If the display of your Master-force Battery Charger shows 'CONNECT CLAMPS', it indicates a poor connection or a bad fuse. Check the battery and frame connections to ensure they are secure. Also, replace the in-line fuse for the ring connector or 12V plug.
How to check Master-force 260-9509 if the battery clamps do not spark?
The Master-force Battery Charger is equipped with an auto-start feature. It won't supply current to the clamps unless a battery is properly connected, so the clamps will not spark if touched together. This is normal.
Why my Master-force 260-9509 Battery Charger will not turn on?
If the Master-force Battery Charger doesn't turn on when connected properly, the AC outlet might be dead or there could be a poor electrical connection. Check the fuse or circuit breaker supplying the AC outlet and inspect the power cord and any extension cords for loose connections.
General| Model Number | 260-9509 |
|---|---|
| Input Voltage | 120V AC |
| Output Voltage | 12V DC |
| Compatible Battery Types | 12V Lead-Acid batteries |
| Safety Features | Overcharge protection, Short-circuit protection, Reverse polarity protection |
Defines DANGER, WARNING, and CAUTION symbols to indicate severity of potential hazards.
Warning about working near lead-acid batteries due to explosive gases and required precautions.
Guidelines for personal protection, including eye protection, clothing, and avoiding metal items near batteries.
Instructions for preparing the battery, cleaning terminals, and adding distilled water.
Recommendations for placing the charger safely away from the battery and in a ventilated area.
Steps for safely connecting and disconnecting DC output clips, emphasizing switch positions.
Step-by-step guide for connecting the charger to a battery within a vehicle.
Instructions for safely connecting the charger to a battery removed from a vehicle.
Guidance on proper grounding and AC power cord connections, including dangers of altering them.
Guidelines for using extension cords with the charger, including wire size and plug compatibility.
Explanation of the digital display, battery type button, and LED indicator functions.
Detailed steps for charging a battery while it remains installed in the vehicle.
Procedure for charging a battery that has been removed from the vehicle.
Instructions on how to use the quick-connect cable assemblies for efficient connection.
Steps for connecting the battery clamp quick-connect to the charger and battery.
Guide for permanently attaching ring connectors to battery terminals for easy connection.
Instructions for using the 12V accessory plug to charge or maintain the battery.
Table detailing estimated charging times for various battery sizes and types.
Explanation of automatic charging, maintain mode, and battery maintenance technology.
Describes messages related to battery connection status and potential errors.
Indicates when charging is complete and the unit enters maintain mode.
Explains desulfation mode for sulfated batteries and the 'Aborted Charge' status.
Lists and explains various messages displayed by the charger during operation.
Advice on cleaning clamps, charger case, and proper storage of cords and clamps.
Identifies common issues like non-sparking clamps, no power, and error messages with solutions.
Details the charger's input voltage, output voltage, and output current rating.
Details the return policy and refund conditions within 90 days of purchase.
Outlines the terms and conditions of the 3-year limited warranty, including exclusions.
To Next Page