Master Forge BG179A - Page 52

NATURAL GAS CONVERSION
14
13. Remove the LP orifices of all the
main burners and the searing burner
with the orifice removal tool (CC) and
install the1.45mm orifices (FF).
Hardware Used
x 1
x 5
14. Remove the 6 screws at the back of
burner box with the Phillips head
screwdriver (DD). Detach the rotisserie
burner cover from the rear panel of burner
box.
During this step, keep a firm hold on the
rear burner cover. Otherwise, it will drop
and may break, possibly causing injury.
Hardware Used
x 1
Rear Burner
Cover
Orifice
Removal Tool
CC
FF
1.45mm Orifice
Phillips Head
Screwdriver
DD
CC
FF
13
14
11. Adjust the air shutters of main
burners and searing burner by loosening
the air shutter screws with the Phillips
screwdriver (DD).
Hardware Used
x 1Phillips Head
Screwdriver
DD
11
12. Ajuster les obturateurs d’air des brûleurs
SULQFLSDX[HWGXEUOHXUjVDLVLUWHOTX¶LOOXVWUp
en desserrant les vis des obturateurs d’air
DYHFOHWRXUQHYLVjWrWHFUXFLIRUPH''
7RXUQHYLVjWrWH
cruciforme
Matériel utilisé
12
CONVERSION AU GAZ NATUREL
52
5HWLUHUOHVRUL¿FHVGHFRPEXVWLRQ
de propane liquide de tous les brûleurs
SULQFLSDX[HWGXEUOHXUjVDLVLUDYHFODFOp
GHFKDQJHPHQWG¶RUL¿FHV&&HWLQVWDOOHUOHV
RUL¿FHVGHFRPEXVWLRQGHĭPP))
14. Retirer les 6 vis à l’arrière de la boîte du
EUOHXUDYHFOHWRXUQHYLVjWrWHFUXFLIRUPH
(DD). Détacher le couvercle du brûleur à rôtir
du panneau arrière de la boîte du brûleur.
3HQGDQWFHWWHpWDSHJDUGHUXQHSULVHIHUPH
VXUOHFRXYHUFOHGXEUOHXUDUULqUH6LQRQ
LOWRPEHUDHWSRXUUDVHEULVHUFDXVDQW
SRVVLEOHPHQWGHVEOHVVXUHV
Couvercle du
brûleur arrière
Clé de changement
G¶RUL¿FHV
7RXUQHYLVjWrWH
cruciforme
2UL¿FHVGH
combustion de
ĭPP
Matériel utilisé
Matériel utilisé