86DO NOT DIVE.
MEMORY FAILURE - CHECKSUM ERROR*
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
MEMORY WARNING - PERSISTENT MEMORY RESET*
Appears after any system setup change. Contact your dealer or service organization if this message
appears on more than one power-up, or if it appears after the system has been running normally
for a period of time.
MEMORY FAILURE - CLOCK ERROR*
Contact your dealer or service organization.
CONFIGURATION ERROR – SPA WILL NOT START UP
Contact your dealer or service organization.
A PUMP APPEARS TO BE STUCK ON
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your
dealer or service organization.
A PUMP APPEARS TO HAVE BEEN STUCK ON WHEN SPA WAS LAST
POWERED
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
* This message can be reset from the topside panel with any button press.
Spa Controls - MP30
System Related Messages
To Next Page
Loading...
