Need help?Do you have a question about the Master Spas jet Away and is the answer not in the manual?
General| Heater | 4kW |
|---|---|
| Shell Material | Acrylic |
| Water Capacity | 350 gallons (1325 liters) |
| Ozone System | Optional |
| Lighting | LED lighting |
| Insulation | Full Foam |
| Electrical Requirements | 220V, 50A |
Instructions regarding the safety sign and its placement for user protection.
Critical information for electricians before starting installation.
Considerations for spa placement, access, and foundation requirements.
Placing the spa and removing front panel for electrical access.
Checking unions/valves, filling spa, and turning power on.
Instructions for opening jets on different spa models.
Relieving airlock and balancing water chemistry.
Details on the ECO PUR™ water purification system.
Steps for initial water balancing and sanitization for ECO PUR™ systems.
Advantages include bacteria destruction, metal removal, pH stabilization, and cleaning.
Steps for initial water balancing and sanitization for Freedom Spas.
Subsequent steps for water balancing and sanitization.
Troubleshooting causes and fixes for water odor and cloudy water.
Troubleshooting causes and fixes for scum rings and skin irritation.
Troubleshooting causes and fixes for foaming.
Guide to initial activation, icon meanings, and temperature settings.
Instructions for setting temperature and adjusting the spa's time.
Guide to initial activation and temperature settings.
Using the Cool and Warm buttons to adjust temperature.
Operating pumps 2 and 3 for jet activation.
Automatic pump activation to prevent freezing.
Messages for overheat and potential freeze conditions.
Messages for sensor faults and low flow issues.
Messages for heater issues, spa modes, and status indicators.
Guide to initial activation and temperature settings.
Operating the spa pumps for jet activation.
Explanation of Standard, Economy, and Sleep modes.
Messages for no display, overheat, freeze, sensor, and flow issues.
Troubleshooting steps when the spa control panel is blank.
Steps to diagnose pump and jet performance problems.
Steps to diagnose and resolve heating issues.
Explanation of GFCI tripping causes and solutions.
To Next Page