EasyManua.ls Logo

Master Spas MP Force - User Manual

Master Spas MP Force
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
& LIMITED WARRANTY

Questions and Answers

  • T
    Taylor PowellSep 10, 2025
    Why is my Master Spas Swimming Pool water cloudy and green?
    • M
      Michael LopezSep 10, 2025
      Cloudy and green water in your Master Spas Swimming Pool may be caused by low total alkalinity levels. Use a pH increaser to resolve this. Another possible cause is low sanitizer levels; apply an oxidizer/non-chlorine shock treatment and adjust the sanitizer accordingly.
  • L
    Leonard HenryAug 23, 2025
    What to do if Master Spas MP Force Hot Tub causes eye or skin irritation?
    • E
      Edwin ThompsonAug 23, 2025
      If you experience eye or skin irritation from your Master Spas Hot Tub, it could be due to unsanitary water. Shock the swim spa with a non-chlorine shock treatment. Also, if the free chlorine level is above 5 ppm, allow it to drop below that level. Check your sanitizer and pH levels and adjust them according to your spa test strip results.
  • G
    George MitchellAug 25, 2025
    How to get rid of chlorine/bromine odor in Master Spas MP Force?
    • A
      Allison LopezAug 25, 2025
      A chlorine or bromine odor in your Master Spas Hot Tub usually indicates excessive chlorine or bromine levels. Shock the water with a non-chlorine shock treatment to resolve this. Also, check the pH level and adjust it if necessary.
  • K
    Kyle EdwardsAug 27, 2025
    Why does my Master Spas Hot Tub have a strange water odor?
    • D
      Dean VargasAug 27, 2025
      A water odor in your Master Spas Hot Tub can be caused by a few things. It may be due to low levels of sanitizer, so shock the water with a non-chlorine shock treatment or adjust sanitizer levels. The pH may be out of range, so adjust the pH level if needed. Another cause can be bacteria or algae growth, in which case you should adjust the sanitizer.
  • K
    Kristie SmithAug 28, 2025
    How to remove scum ring around Master Spas MP Force?
    • M
      Michele SmithAug 28, 2025
      A scum ring around your Master Spas Hot Tub is typically caused by a buildup of oils, dirt, and organic elements. Wipe it off with a clean towel and add an enzyme product to help prevent future buildup.
  • E
    Eric OrrAug 29, 2025
    What causes foaming in Master Spas MP Force Hot Tub and how to fix it?
    • M
      michael09Aug 29, 2025
      Foaming in your Master Spas Hot Tub is often due to high levels of body oils, lotions, soap, etc. Adding a small amount of defoamer can help to reduce the foaming.
  • H
    hleblancSep 18, 2025
    What causes pitting of metal fixtures in Master Spas Swimming Pool?
    • B
      Benjamin MartinezSep 18, 2025
      Pitting of metal fixtures in your Master Spas Swimming Pool can be caused by low pH or total alkalinity. Check the water chemistry and adjust it accordingly.
  • J
    Jennifer HernandezSep 12, 2025
    Why is my Master Spas Swimming Pool foaming?
    • D
      Derrick MurraySep 12, 2025
      Foaming in your Master Spas Swimming Pool can occur due to high levels of body oils, lotions, soap, etc. Add a small amount of defoamer or an enzyme product, and check the water chemistry. Low calcium hardness can also cause foaming, so use a calcium hardness increaser. Unbalanced water chemistry may also be the reason, so test and adjust the chemistry levels.
  • K
    Kimberly MendozaSep 8, 2025
    What to do if Master Spas Swimming Pool water is clear green?
    • M
      Melissa ParkSep 8, 2025
      Clear green water in your Master Spas Swimming Pool could be due to high iron or copper content. Use a sequestering agent to address this. It may also be caused by low sanitizer levels. Apply an oxidizer or non-chlorine shock treatment to correct this.
  • D
    Dana McculloughSep 5, 2025
    How to get rid of chlorine odor in Master Spas Swimming Pool?
    • J
      James MeadowsSep 5, 2025
      If your Master Spas Swimming Pool water has a chlorine odor, it could be due to excessive chlorine. To resolve this, shock the water with an oxidizer or a non-chlorine shock treatment. Another cause could be a low pH level; adjust the pH if necessary.

Summary

Safety Instructions

Important Safety Instructions

Key safety precautions for installation and use of the swim spa.

VGB Suction Safety & Maintenance Instructions

Important Safety Instructions

Warnings about suction entrapment hazards and their types.

Water Maintenance - Start-Up

Water Maintenance - Schedule

Water Maintenance - Trouble-Shooting Guide

Regular Maintenance Procedures

Draining Your Swim Spa

Procedures for draining the swim spa using a submersible sump pump.

Cleaning Your Filter Elements

Instructions for cleaning and maintaining swim spa filter elements.

Winterizing & Storing Your Swim Spa

Winterizing Your Swim Spa

Steps for draining and winterizing the swim spa if not in use.

Site Preparation; General Guidelines

Electrical Requirements

Configuration 3 - 240 V, 50 A Service

Electrical requirements for Configuration 3.

Configuration 5 - 240 V, 50 A Service & 240 V, 30 A GFCI Service

Electrical requirements for Configuration 5.

Initial Swim Spa Setup

Swim Spa Controls - Icon Spa Touch

Propulsion System Controls

The Propulsion System

Introduction to the belt-driven propulsion system and its controls.

Swim Control Operation

Detailed explanation of the swim spa control interface and its functions.

Limited Warranty

Master Spas MP Force Specifications

General IconGeneral
Seating Capacity6-7
Weight (Dry)900 lbs
InsulationFoam
Control SystemBalboa
Voltage240V
Amperage50A
Shell MaterialAcrylic
Warranty5 years
Heater4.0 kW
LightingLED
FiltrationEcoPur® Charge
Cabinet MaterialDuraMaster™ Polymer

Related product manuals