63DO NOT DIVE.
SWIM SPA CONTROLS - ICON SPA TOUCH
ADJUSTING FILTRATION
MAIN FILTRATION
Using similar adjustments as the Time-of-Day Screen on previous page, Filter Cycles are set using
a start time and an end time. Each setting can be adjusted in 15-minute increments. The panel
calculates the duration and displays it automatically.
The Filter Icon
on the Settings Screen takes you to a screen where you control the Filter Cycles.
FILTER CYCLE 2 - OPTIONAL FILTRATION
Filter Cycle 2 is OFF by default on most systems. Press “1” to view Filter 1. Press “2” once to view
Filter 2. Press “2” again to turn Filter 2 ON or OFF.
When Filter Cycle 2 is ON, it can be adjusted in the same manner as Filter Cycle 1.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtration by the
overlap amount.
Filtration
Start
8 : 00 pm
End
12 : 00 pm
Duration 4 Hr 00 Min
Viewing Filter 1 while Filter 2 is OFF: Viewing Filter 2 when it is ON and selected:
Filtration
Start
8 : 00 pm
End
12 : 00 pm
Duration 4 Hr 00 Min
Filtration
Start 8 : 00 pm
End 12 : 00 pm
Duration 4 Hr 00 Min
To Next Page
Loading...
