35DO NOT DIVE.
MODEL SPECIFICATIONS
Model Listing
Number
Swim Spa
Dimensions (in./cm)
Electrical
Requirements
1
Seating
Capacity
2
Water Capacity
(gallons/m)
3
Dry Weight
(lbs./kilos)
4
Full Weight
(lbs./kilos)
3,4
Therapy
Pumps
MP FORCE 8600 201"x 94"x 51"
511 x 239 x 130
Configuration # 3
240V, 50A SVC"
5 1660 / 6.28 2490 / 1129 17260 / 7829 2
MP FORCE D 1420 201"x 94"x 60"
511 x 239 x 153
Configuration # 3
240V, 50A SVC
5 1935 / 7.32 2685 / 1218 19750 / 8959 2
MP SIGNATURE D 8900 215"x 94"x 60"
547 x 239 x 153
Configuration # 3
240V, 50A SVC
5 2275 / 8.61 2795 / 1268 22695 / 10295 2
MP SIGNATURE D
WITH WAVE XP PRO
8900 215"x 94"x 60"
547 x 239 x 153
Configuration # 7
240V, 50A GFCI &
240V, 50A SVC
5 2275 / 8.61 2795 / 1268 22695 / 10295 2
MP MOMENTUM 80 8700A - Spa
8700B - Swim
231"x 94"x 51"
587 x 239 x 130
Configuration # 5
240V, 50A SVC &
240V, 30A GFCI
7
5 - Spa
2 - Swim
2,055 / 7.78
270 / 1.02 - Spa
1785 / 6.76 - Swim
3280 / 1488 21720 / 9852 3
MP MOMENTUM 80 D 1250A - Spa
1250B - Swim
231"x 94"x 60"
587 x 239 x 152
Configuration # 5
240V, 50A SVC &
240V, 30A GFCI
7
5 - Spa
2 - Swim
2,325 / 8.80
275 / 1.04 - Spa
2,050 / 7.76 - Swim
3700 / 1678 24390 / 11063 3
1
As configured from factory. See appropriate Electrical Requirements section for further details.
2
Total bather capacity in swim spa. The number of bathers in swim spa should never exceed indicated seating capacity. Depending on swim
spa size, water level and bather displacement; full seating capacity may not be achievable. Do not allow additional bathers to enter if bather
displacment results in water levels overflowing or reaching the swim spa controls (air controls, diverters, swim spa topside control and etc.) as
this will result in water leaking out of the swim spa shell and potentially in to the equipment area.
3
Full weight based on dry weight of swim spa, max seating capacity of swim spa, assumed average weight per person of 185 pounds and
estimated water weight of 8.34 pounds per gallon. Rounded up in increments of 5.
4
Manufacturing tolerances along with other factors can result in variance in actual swim spa weight. If weight is a critical figure necessary for
delivery, or final installation, we suggest a minimum of 15% be added to the listed weight when planning delivery or installation.
Electrical requirements need checked.. as these are not listed in
SS brochures so I have no means to check
To Next Page
Loading...
